skip to Main Content
LED100-LEDES100

LED100 & LEDES100 | Moflash LED Beacons

Flashing or Static Beacon / Light

The LED100 ECO Beacon series is suitable for light commercial & industrial signalling applications where local indication is required.

These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing (Not ES Version).

The LED ECO range has been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. The design allows for termination inside the enclosure through the base (Not ES Version).

The ES Version has an E27 Edison Screw Cap fitted into the base of the beacon. This design lends itself for use in temporary signalling locations where a warning or hazard is not normally present, or has the ability to be installed in an area using existing electrical lighting points, avoiding any additional wiring.

  • Continuously rated
  • LED long life
  • Low current consumption
  • 2 point fix
  • Dustproof and Weatherproof

Colour Options

Available in Amber, Red or Green

Product Data Sheet
Download
LED100 Installation Data Sheet
Download
LEDES100 Installation Data Sheet
Download
CAD Files (.STEP)
LED100
LEDES100
Ordering information for the LED100-LEDES100 Beacon
Code No.VoltageLight SourceCurrent
LED100-018-20v Ac/Dc acdc8 SMT LEDs430mA *
LED100-0220-30v Ac/Dc acdc8 SMT LEDs110mA **
LED100-0348v Ac ~8 SMT LEDsTBA
LED100-0540-380v Dc ---8 SMT LEDs35mA ***
ES Version
LEDES100-0540-380v Dc ---8 SMT LEDs35mA
85-280v Ac ~
* at 12v Dc** at 24v Dc*** at 230v Ac
Back To Top